Ronchini Massimo (RM Technologies) utilizes a high-precision range of tungsten carbide knife blades designed for their specialized cutting heads, such as the EOT (Electric Oscillating Tool) and POT (Pneumatic Oscillating Tool) modules found on the SkyMill, MaxiMill, and RM-Easy series.
Key Tooling Categories for Ronchini Systems
1. Oscillating Knife Blades (EOT/POT)
These are the most common blades used for soft and semi-rigid materials. They are designed to withstand high-frequency vibrations (up to 12,000–18,000 rpm depending on the head).
Standard Flat Blades: Used for folding cartons, corrugated plastics, and thin foams.
Pointed Blades: Specifically for high-detail work and tight radii in leather and textiles.
Common Lengths: Typically available in lengths from 10mm to 70mm to match the maximum stroke of the Ronchini oscillating heads.
2. Drag / Tangential Blades
Used in the RM tangential modules for materials where oscillation isn't required but high directional precision is.
Typical use cases: Vinyl, thin PVC, magnetic foils, and adhesive-backed films.
Materials: These are almost exclusively solid tungsten carbide to maintain a "razor" edge over long production runs.
3. Specialty "RM" Series Blades
Part numbers like the RM-03456728 you previously mentioned are often categorized as "Specialty" or "Technical" blades.
Double-Edged Variants: Used for thick, fibrous materials like rock wool or heavy industrial felt to prevent material "snagging" during the up-stroke.
Extra-Thick Shorter Blades: Designed for extremely tough gasket materials or rubber where blade deflection (bending) must be minimized.
Machine Compatibility
Ronchini systems are modular, meaning their blade selection depends on which tool head is mounted on the gantry:
SkyMill Series: Often equipped with hybrid heads that support both 6mm round-shank blades and flat-stock blades.
MaxiMill 3D: High-power systems that frequently utilize the longer 70mm blades for deep foam contouring and 3D architectural modeling.
Purchasing Options
Aftermarket/Compatible: Industrial manufacturers like OYEA Knives and China-Oyea produce a wide range of compatible tungsten carbide blades,
Maintenance Pro-Tip: Because Ronchini machines are high-speed, ensure the blade clamping screw is tightened to the specific torque mentioned in your RM manual—over-tightening can crack the carbide, while under-tightening leads to blade "chatter" and poor cut quality.
-
Ronchini Rm-01039893 Rm-01039894 Rm-01039892 Rm-01039896 Knife Blades
-
Ronchini Rm-01039903 Rm-01039907 Rm-01033857 Rm-01030730 Knife Blades
-
Ronchini Rm-01045485 Rm-01030910 Rm-01030775 Rm-01040445 Knife Blades
-
Ronchini Rm-01040481 01040906 01040075 01040507 01040508 01060676 03456728 03456728 Knife Blades
SHARE：
PREV : Elitron Kombo Sd / Sdc Series And Booster Series Cutting Plotter Knives Knife Blades NEXT : COMELZ HZ2NL1 HZ2RL1 HZ2XL1 HZ3XL1 HZ2TL HZ5XL HZ2P HZ2R HZ2N HZ3B HZ3XL Oscillating Knife Blades
